manualshive.com logo in svg

Mitel 5610, Configuration And Administration Manual, Page: 53 / 59

Share
Download
Mitel 5610 Configuration And Administration Manual Download Page 53

47 

Feature Interactions 

Call log 

If the device is part of a personal ring group or suite services, calls that are answered by other 
devices in the group or suite will show up as missed calls on the handset. This is a common problem 
with call log capabilities. 

If a prefix digit is required to dial internal or external calls that have been logged, then you cannot dial 
directly from the call log. This is a common problem with call log capabilities. 

Personal Ring Group (PRG) 

The handset cannot push or pull calls to other devices. If a MiNET device is in the PRG, it can push 
or pull calls to/from the SIP device. 

Maintenance 

Firmware Updates 

Firmware updates are provided via the Mitel Online Software Download site. You download new 
firmware files from the Mitel Online Software Download site and install them on a tftp server in your 
network. The IP DECT Stand automatically detects the firmware on the tftp server and then 
downloads them to all handsets that are associated with the stand. 

You must configure the stand via the Configurator web interface to poll (check) your tftp server for 
new firmware. You can configure the stand to poll the tftp server: 

 

every day at a specific time (absolute schedule), or 

 

on a regular basis, for example every hour (relative schedule). 

Download the Firmware 

1.  Access 

www.mitel.com

 

2.  Log into your Mitel Online account. 

3.  Under 

Technical

, click 

Software Downloads

. 

4.  Scroll down the list of products and click 

Wireless

. 

5.  Click 

5610 IP DECT Handset

. 

6.  Launch the .pdf of the Release Notes and review the contents of the firmware update. 

7.  Save the 5610 IP DECT firmware update files to the root directory on your tftp server. Save all 

files with .txt and .fwu file extensions to the tftp server. Do not save the .pdf files. 

Schedule Automatic Firmware Updates 

1.  Log into the Mitel IP DECT Stand - Configurator web interface. 

2.  Click 

Management Settings

. 

3.  Under 

Management Settings

, se

t the “Management Transfer Protocol” field to “TFTP”.  

4.  Under 

Firmware Update Settings

, complete the fields: 

Summary of Contents for 5610




























































Reviews:

No comments