Mitel 5324 IP User Manual Download Page 35

Page: 35 / 56

5312/5324 IP Phones User Guide

Timed Reminder (5324 IP Phone only)

To program a Reminder:

1. Press (APPLICATIONS).

2. Press the No softkey until "Timed Reminder?" appears.

3. Press the Yes softkey.

4. Enter the time in 24-hour format.

5. Press the Save softkey.

To view, change, and/or cancel a pending Reminder:

1. Press (APPLICATIONS).

2. Press the No softkey until "Timed Reminder?" appears.

3. Press the Yes softkey.

4. Do one of the following:



To change the Reminder, press the

Change

softkey, enter the new time, and press

the

Save

softkey.



To cancel the Reminder, press the

Clear

softkey.



To exit without canceling the Reminder, press

(APPLICATIONS).

To acknowledge a Reminder when your phone rings once:



Press

the

Confirm

softkey.

Headset Operation

To enable Headset Operation:



Press

the

Headset

feature key.

To answer a call (when Auto Answer is disabled):



Press the flashing line key.

To hang up:



Press (CANCEL).

To mute your headset microphone:



Press

the (MUTE) key. The light turns ON.

- 29 -

Summary of Contents for 5324 IP

























































Search results

Summary of Contents for 5324 IP

Reviews:

Related manuals for 5324 IP

Brands by name

Popular brands

Mitel 5324 IP, User Manual

Search results

Summary of Contents for 5324 IP

Reviews:

Related manuals for 5324 IP

Brands by name

Popular brands