SB203
ORIGINAL INSTRUCTIONS
7
Replacing the Safety Controller Memory Cassette
The safety controller must have a new program for the changes to take place.
Figure 4: Enclosure Overview & Safety Controller Steps
Installing the Memory Cassette into the Safety Controller
1. With the power locked out, locate the safety controller shown in Figure 4 and
verify that the DIP switch 4 is in the off (left) position.
2. Remove the old memory cassette from the safety controller and follow the
instructions on page 2 to return it to MiTek.
3. Insert the new memory cassette into the safety controller.
VFD Screen
VFD Main
Relays
Extension
Module
FIO-01
DIP
switch
4 in left
position.
Safety
Controller
memory casette
VFD
Memory
Module
230-volt enclosure shown. 460-volt enclosure may vary slightly.
