MiTAC ND510, User Manual

Page: 11 / 12

9
„
Connect the charger to a proper power source. The voltage requirements are found on the product case
and/or packaging.
„
Do not use the charger if the cord becomes damaged.
„
Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged
or exposed to excess moisture.
About the battery
„
Use a specified battery in the equipment.
„
CAUTION: This unit contains a non-replaceable internal Lithium Ion battery. The battery can burst or
explode, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush,
puncture, or dispose of in fire or water.
„
Important instructions (for service personnel only)
9
Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
9
Replace only with the same or equivalent type recommended by the manufacturer.
9
The battery must be recycled or disposed of properly.
9
Use the battery only in the specified equipment.