MiTAC MX1-10FEP Series, User Manual

Page: 17 / 69

*Note
6
: The following configurations in ultimate use might cause system
shut down unexpectedly.
- 12 x LANs or 10 x PoE LANs with some NVMe SSD models (Please check the available list
with our sales contact window)
- 12 x LANs or 10 x PoE LANs with mPCIe or M.2 Wifi Card (Not include CNVi Wifi Card.
Please check the available list with our sales contact window)
*Note
7
: Please read the BIOS release note before re-flashing BIOS. If the
BIOS notes mention the BIOS will be loaded default after re-flashing BIOS,
please check the BIOS setting again before boot up. For example,
inconsistent RAID setting might cause system boot up issue.
*Note
8
: When MX1-10FEP-D is installed with PCIe GFX card, the BIOS setup
menu will only have display output via external graphic card.
*Note
9
: When MX1-10FEP-D is installed with dual layer PCIe GFX card, it can
only be installed with 1 internal HDD/SSD (not include removable HDD/SSD)
instead of 2 due to mechanical limitation. The SATA cable connector needs
to insert to the SATA connector beside the 2*40x40x20mm internal system
fan. The cable clip might also need to be removed due to mechanical
concern with GFX card.
*Note
10
: When MX1-10FEP-D is installed with NVIDIA T4 or P4 AI card,
2*40x40x28mm internal system fan, and fan duct, it can only be installed
with 1 internal HDD/SSD (not include removable HDD/SSD) instead of 2 in
avoid of fan duct interference. The SATA cable connector needs to insert to
the internal SATA connector.