General Information
Please refer to this handbook for questions on using the Magellan
RoadMate receiver. If you are still unable to answer your questions,
check our technical support web page at: http://www.magellanGPS.com/
support/.
Magellan RoadMate
Power On
Slide the power switch (A) to the left to turn the receiver on.
The first time you use the Magellan RoadMate it may take up to 4
minutes to compute your location under normal conditions. With
adverse conditions (not having a clear view of the sky) the time to
compute your location the first time can greatly increase.
Pairing Bluetooth
®
The instructions shown here are for pairing a phone during normal use.
The first time you use Bluetooth in your Magellan RoadMate receiver,
the receiver will automatically ask you if you want to pair a phone.
After selecting Yes the receiver is in pairing mode. Follow the
instructions in your phone manual to set it in pairing mode. After the
phone has searched for new devices, select “Magellan” from the list.
Your phone will ask for a passcode. Enter ‘1234’.
Tap Yes on the Magellan RoadMate.
A screen will confirm the successful pairing.
A - Power Switch
B - Micro-SD slot
C - Power Input
(USB)
A
B
C
605-0323-001 B detail.fm Page 8 Wednesday, March 17, 2010 2:35 PM
