27
BIOS Setup option name
Type
[Default] / Select Value
Show
Help string
Advanced
Page
Yes
►
NCT6683D Super IO Configuration
Yes
System Super IO Chip Parameters.
Super IO Chip
Information string
NCT6683D
Yes
►
Serial Port 1 Configuration
Yes
Set Parameters of Serial Port 1 (COMA)
Serial Port
Select item
[Enabled] / Disabled
Yes
Enable or Disable Serial Port (COM)
Device Settings
Board Infromation
IO=3F8h; IRQ=4
Yes
Line separator
Serial Port Mode
Select item
1T/1R RS-422
/ [3T/5R RS-232]
/ 1T/1R RS-485 TX ENABLE Low Active
/ 1T/1R RS-422 with termination resister
/ 1T/1R RS-485 with termination resister
TX ENABLE Low Active
/ Disable
Yes
Select Serial Port Mode
►
Serial Port 2 Configuration
Yes
Set Parameters of Serial Port 2 (COMC)
Serial Port
Select item
[Enabled] / Disabled
Yes
Enable or Disable Serial Port (COM)
Device Settings
Board Infromation
IO=2F8h; IRQ=3
Yes
Line separator
Serial Port Mode
Select item
1T/1R RS-422
/ [3T/5R RS-232]
/ 1T/1R RS-485 TX ENABLE Low Active
/ 1T/1R RS-422 with termination resister
/ 1T/1R RS-485 with termination resister
TX ENABLE Low Active
/ Disable
Yes
Select Serial Port Mode
►
Serial Port 3 Configuration
Yes
Set Parameters of Serial Port 3 (COMD)
Serial Port
Select item
[Enabled] / Disabled
Yes
Enable or Disable Serial Port (COM)
Device Settings
Board Infromation
IO=2F8h; IRQ=3
Yes
►
Serial Port 4 Configuration
Yes
Set Parameters of Serial Port 4 (COME)
Serial Port
Select item
[Enabled] / Disabled
Yes
Enable or Disable Serial Port (COM)
Device Settings
Board Infromation
IO=2F8h; IRQ=3
Yes
►
Hardware Monitor
Yes
Monitor hardware status
Pc Health Status
Header
Line separator
Hardware Monitor Alert Enable
Select item
Disabled / [Enabled]
Yes
Hardware Monitor Alert Enable and Disable. If
monitored voltage/temperature/fan status are out of
range, BIOS displays warning message during
POST.
Line separator
VR_THRM_P1
Board Infromation
+ xx C
Yes
System temperature2
Board Infromation
+ xx C
Yes
AVSB
Board Infromation
+3.135~3.465 V
Yes
VCC_MON
Board Infromation
+4.75~5.25 V
Yes
VCC3_MON
Board Infromation
+3.135~3.465 V
Yes
VCORE_MON
Board Infromation
+0.45~1.3 V
Yes
V_SM_MON
Board Infromation
+1.045~1.155 V
Yes
V_1P05
Board Infromation
+0.099~1.103 V
Yes
VCCRTC
Board Infromation
+3.135~3.465 V
Yes
VCC3
Board Infromation
+3.135~3.465 V
Yes
3VSB
Board Infromation
+3.135~3.465 V
Yes
BACKUP_BAT_MON
Board Infromation
+3.0~4.2 V
Yes
►
S5 RTC Wake Setting
Yes
Enable system to wake from S5 using RTC alarm
Wake System from S5
Information string
[Disabled] / Fixed Time
Yes
Enabler or disable System wake on alarm event,
Select FixedTime, system will wake on the
hr::min::sec specified.
Wake up hour
Text input
[0] ~ 23
Depend
Select 0-23 For example enter 3 for 3am and 15 for
3pm
Wake up minute
Text input
[0] ~ 59
Depend select 0 - 59 for Minute
Wake up second
Text input
[0] ~ 59
Depend select 0 - 59 for Second
►
CPU Configuration
Yes
CPU Configuration Parameters
Intel® Pentium® CPU N4200 @1.10Ghz
Information string
Yes
CPU Signature
Board Infromation
506CA
Yes
Microcode Patch
Board Infromation
1A
Yes
Max CPU Speed
Board Infromation
1100 MHz
Yes
Min CPU Speed
Board Infromation
800 MHz
Yes
Processor Cores
Board Infromation
4
Yes
Intel HT Technology
Board Infromation
Supported /
Not Supported
Yes
Intel VT-x Technology
Board Infromation
Supported
/ Not Supported
Yes
Line separator
L1 Data Cache
Board Infromation
24 KB x 4
Yes
L1 Code Cache
Board Infromation
32 KB x 4
Yes
L2 Cache
Board Infromation
1024 KB x 2
Yes
L3 Cache
Board Infromation
Supported /
Not Present
Yes
64-bit
Board Infromation
Supported
/ Not Supported
Yes
Line separator
Yes
Intel Virtualization Technology
Select item
Disabled / [Enabled]
Yes
When enabled, a VMM can utilize the additional
hardware capabilities provided by Vanderpool
Technology
Burst Frequency
Select item
Disabled / [Enabled]
Yes
Burst Frequency.
►
Network Stack Configuration
Yes
Network Stack Settings
Network Stack
Select item
[Disabled] / Enabled
Yes
Enable/Disable UEFI Network Stack
Ipv4 PXE Support
Text input
[Disabled] / Enabled
Depend
Enable Ipv4 PXE Boot Support. If disabled IPV4
PXE boot option will not be created
Ipv6 PXE Support
Text input
[Disabled] / Enabled
Depend
Enable Ipv4 PXE Boot Support. If disabled IPV6
PXE boot option will not be created
Summary of Contents for Cappucino
