MiTAC 6513VX, Reference

Page: 27 / 33

First/Second/Third Boot Device, Boot Other Device
This item sets the sequence of booting, i.e., which drive to search first for the
operating system.
Swap Floppy Drive
This feature allows you to exchange the drive names of the two floppy disk
drives, if installed. Make sure that
Drive A and Drive B item in the Standard
CMOS Features menu are updated accordingly.
Boot Up Floppy Seek
This item sets if the system will verify the floppy disk drive type during POST.
Boot Up Numlock Status
This item sets if the Num Lock key will be automatically activated after system
startup.
Gate A20 Option
This item uses the fast gate A20 line to access any memory above 1MB. Setting
this item to make the access faster than the normal method.
Typematic Rate Setting
This item sets if the typematic rate is to be used. When disabled, continually
holding down a key on your keyboard will generate only one instance. In other
words, the BIOS will only report that the key is down. When the typematic rate is
enabled, the BIOS will report as before, but it will then wait a moment, and, if the
key is still down, it will begin the report that the key has been depressed
repeatedly. For example, you would use such a feature to accelerate cursor
movements with the arrow keys.
When this item is set to Enabled, the following two sub-items appear.
Typematic Rate (Chars/Sec)
This item sets the rate (in characters/second) at which the keys are accelerated.
Typematic Delay (Msec)
This item sets the delay (in msecond) between when the key was first depressed
and when the acceleration begins.
27