Overview
Power Connection
The IESH-MB208G-R switch supports dual +12 ~ 48 V
DC
power inputs.
1.
Insert the positive and negative wires into the V+ and V-
contacts on the terminal block.
2.
Tighten wire-clamps to prevent the DC wiresfrom loosing.
Warning:
This is a Class A product. In domestic environment
this product may cause radio interference in which case the
user may be required to take adequate measures.
Warning:
This product is intended to be supplied by a Listed
Power Adapter or DC power source, rate
12 ~ 48 VDC, 1.5A; Tma 60 degree C, if need further
assistance, please contact Advantech for further information.
Startup Manual 2
Mounting
DIN-rail Mounting
1. Installing the DIN-Rail Mounting Kit.
2. Removing the DIN-Rail.
Wall Mounting
1. Attach the brackets included to the switch with screws.
2. With the brackets attached, hang the switch to nails on the wall.
2
1
DINRail
2
1
DIN Rail
Wire Range
