4
Assembly of Tower Fan
1. Open the package and get out the unit: Check whether the parts are complete,
Including Warranty Card, Instruction Manual, Remote Controller, Disc Screw.
2. Finish assembling as shown below.
1) Put the fan on soft place (to avoid any scratches to the fan surface)
2) Install the front base and back base to a whole unit. Att
ention that the base U hole’s
direction should be the same as the power cord, make sure that the power cord in the
U hole after completing assembling;
3) Place the fan well and power on, then operate the fan according to the instruction
manual.
Operation of Tower Fan
Touch- Button: Trigger the corresponding functions by touching the keys on operation
panel.
POWER ON
Buzzer “ bi-bi”, the system is in standby mode, without work.
Step 1
Step 2
