Use your Bluetooth Earbuds
Charging the Case
The wireless earbuds are equipped with a charging case which is not only a carrying
case, but also a charging dock to charge the earbuds.
When the charging case is in low battery level, please recharge the case:
1.
Connect the small type C plug of USB cable (included) into the charging socket,
and large USB plug into the USB socket on computer or USB charging adaptor (not
included – DC 5V 0.5A or more).
2.
The charging case starts charging. LED indicator lights red and flashes during
charging.
3.
When the charging case is fully charged, the LED indicator lights red constantly.
Disconnect the case after charged.
4.
The charging case serves as a portable backup battery for charging the earbuds.
Normally, a full charge takes about 1.5-2 hours. When the charging case is fully
charged, it supports about 3 times full recharge cycle for the earbuds.
Note: If the LED indicator won’t light green when opening the charging
case, it indicated that the battery is exhausted and need to be charged.
Charging the earbuds
1.
Open the charging case, the LED indicator lights green. Place the earbuds into
the corresponding charging docks of charging case, make sure the charging
contactors are matching.
2.
Close the charging case, the green LED indicator goes off. The earbuds start
charging. LED indicator lights blue during charging.
3.
When the earbud is fully charged, the LED indicator goes off.
Note:
•
If there is sweat or fluid on the charging contactor or earbud, clean it before
charging.
•
Normally, a full charge takes about 1.5 -2 hours.
•
Use only with the original Charging case to avoid any damage.
•
Charge the earbuds at least once every 3 months when not in use for a long time.
