Description
Four bike capacity 55kg, foldable, lockable, towable up to
1600kg G.T.W. Designed to fit any 50mm receiver.
IMPORTANT:
Always check for 36cm to 41cm of
ground clearance for bikes on the rack. Place
installation instructions in the vehicles glove box after
installation.
Check contents of the box against the parts list to make
sure all components are included.
Tools Required
3/4” open end or socket wrench.
1” open end or socket wrench.
9/16” open end or socket wrench.
Flat blade screwdriver.
Assembly
1.
Assemble horizontal bottom tube (1) into receiver hitch
as shown in Fig. 1. Tap nut plate (2) inside horizontal tube.
Align nut with holes in tube. Secure tube in receiver using
bolt hitch pin (3), 5/8” lock washer (4), hair pin (5).
2.
Assemble angle plates (6) and rubber stop (7) using
1/2” - 13x3.5 screws (8) , 1/2” flat washers (9), 1/2” - 13 nuts
(10) as shown in Fig. 2. Do not completely tighten nuts at this
time.
3.
Slide vertical tube (11) between angle plates as shown in
Fig. 3.
4.
Secure vertical tube using 1/2” screws, washer, nut, hitch
pin (12) and hair pin as shown in Fig.4. Torque 1/2’ - 13 nuts
to position that allowed vertical tube to pivot around 1/2”
screw with slight resistance.
FIG. 3
FIG. 4
PAGE 2
VERTICAL TUBE
HITCH PIN
HAIR PIN
Summary of Contents for MHBC4F
Page 1: ...PAGE 1 ...
