Mission Critical xantrex XPower 3000, Owner'S Manual, Page: 9 / 56

Precautions When Placing the Unit
975-0555-01-01 9
Precautions When Placing the
Unit
NOTICE
RISK OF INVERTER DAMAGE
n
Never allow battery acid to drip on the inverter when
reading specific gravity, or filling battery.
n
Never place the XPower inverter unit directly above
batteries; gases from a battery will corrode and damage
the inverter.
n
Do not place a battery on top of the inverter.
Failure to follow these instructions can result in equipment
damage.
Regulatory
The XPower inverter inverter is certified to UL458 and CSA 107.1
standard. .
The XPower inverter is intended to be used for mobile or
commercial applications. It is not intended for use in marine and
other applications as it may not comply with the additional safety
code requirements needed for those applications. See
limitation
on use on page 9 .
The XPower inverter includes a “Floating Neutral” AC output
design. It may be permanently damaged if the AC output Neutral
is bonded to Ground which is common in distribution panels. Such
damage voids the warranty.
The XPower inverter provides a non-sinusoidal (that is, modified
sine wave) AC output. For more information, see
Inverter Loads
on page 18 .
WARNING
LIMITATION ON USE
n
Do not use in connection with life support systems or other
medical equipment or devices.
n
Do not use in ambulances or other life-saving emergency
vehicles.
Failure to follow these instructions can result in death or serious
injury
.