INSTALLATION
For drywall installation,
mark the hole locations and
drill
Ɍ
6mm holes for the
drywall anchors.
Insert provided drywall
anchors.
Install the mounting bracket.
Connect to 110V power
supply.
Hang the mirror to the wall and
make sure the bracket in the
back of the mirror lineup with
the mounting bracket properly.
Press the mirror down
slightly and make sure the
brackets fit properly.
3
•
Using the wall studs to hang the mirror is highly recommended.
Customer Service:
855.480.2915 | [email protected]
•
This mirror is NOT designed to work with a dimmable wall switch.
•
Infrared sensor requires a minimum clearance of 5-1/4”
