12
www.build.com
9. Using the (4) previously removed blower screws
from step 5, secure blower to back of hood body.
10. Using (8) M4 x 6 screws, attach rectangular
starting collar with damper to back of hood body.
11. Place 7” round cover plate over top 7” round
blower hole and secure by (3) M4 x 6 screws.
Installation –
Horizontal Conversion
7. Picture of blower turned 180 degrees.
8. Position blower inside hood body so that the
(4) blower mount nuts line up with the (4) screw
holes at back of hood body.
12. Re-Install the left and right side bottom spacer
panels and rear fi lter holder panel previously
removed from steps 1 and 2.
Summary of Contents for MH70130AS
Page 2: ...www build com ...
