
9
PL / EN
MIR0406
Część
Symbol
Ilość
KROK / STEP 6
Umieść 4 części szczytowych paneli (21L),(21R) na górze kanałów
ślizgowych (7) (8) i prętów tylnych (10L) (10R). Wyrównaj otwory
i zabezpiecz je śrubami (F1) od wewnątrz. Następnie zamontuj dwa
panele szczytowe (21L) i (21R) razem ze złączem (B3). Zabezpiecz je
za pomocą śruby (F2)i nakrętki, patrz rysunki poniżej.
Place the 4 pieces of the top panels (21L) and (21R) on top of the
slide channels (7) (8) and rear rods (10L) (10R). Align the holes
and secure them with screws (F1) from the inside as shown in the
picture. Next join the 2 top panels (21L) and (21R) with (b3). Align
the holes and secure them with bolt (F2) and nut, see picture below.
Summary of Contents for MIR0406
Page 4: ...3 PL EN MIR0406...