7
STEP 13: Place Header (B6) onto Wall Jambs (B1).
NOTE:
If the header is too long, measure the length
required and cut with hacksaw 1/8” less than
measurement.
STEP 14: Prepare door for installation.
Insert 8 Plastic Rings (B16) into the top holes of
glass door.
STEP 15:
Insert four Roller Brackets (B17) on to Door
Panels (B3 & B4) and line up holes with Plastic Rings
(B16).
STEP 16 A: Insert Machine Screws (B14) into the
Roller Brackets (B17) and tighten screws.
STEP 16B: When assembling the Roller Brackets
(B17), make sure the Wheel is on the wider lip side
of the Bracket (B17).
WHEEL
ON THE WIDER LIP
SIDE
STEP 17: Screw door Guiding Rollers (B7) onto the
Roller Brackets (B17) using the Roller Nut (B18).
