Thank you for choosing the MIROCO MI-EK001 1.7L Stainless Steel Electric
Kettle. Please read this manual carefully and store it in a safe place for future
reference. If you have any questions or concerns, please contact our customer
support team by email at
How to Use
Getting ready: Place the kettle base on an even surface and connect the power
cable. For first-time use, fill the kettle to the maximum water level and fully boil
it, then pour the water away.
1. After the kettle is powered, all of the LED indicators will flash once and the
water level indicator will keep on
，
the device enters standby mode with a
beep sound. If no operation is detected within 5 minutes, the water level
indictor will also turn off.
2. Press the Set Button once to start setting the temperatures and you will hear
a beep sound. The default temperature setting is Boil / 212°F. Once the
temperature is set, press the Start / Stop Button again to start boiling water.
The Start/Stop Button indicator will light up and the temperature indicator will
flash. When the water reaches the target temperature, you will hear 3 beep
sounds.
3. Press the Set Button to select from 6 different temperature settings. Cycle
through the temperature settings with each press of the Set Button. The
corresponding temperature indicator will light up. Once the maximum or
minimum temperature setting is reached, keep pressing the Set Button will
not change the setting.
4. Press the Keep Warm Button to preserve the temperature of the boiled water.
Press again to disable the function and the light will turn off. Once the keep
warm function is activated, the heat will be preserved for 30 minutes until it
automatically shuts off and enters standby mode.
5. Press the Set Button during boiling to switch the temperature setting. Press
the Keep Warm Button to activate or disable the heat preservation function.
Press the Start / Stop Button to stop boiling.
Note: Do not dry boil. If you do, the kettle will enter protection mode and disable
all buttons and indicators. It will only enter standby mode again after the kettle
is completely cooled off.
Caution
1. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
2. Do not disassemble the product.
3. Please do not remove the power cable with wet hands as it may cause an electric
shock.
4. Do not use the product to boil milk, coffee, tea, or to cook food.
5. Do not dry boil the kettle.
Lid Release Button
Water Level Indicator
Base
Power Cable
Set Button
Keep Warm Button
Start / Stop Button
6 Temperature Settings:
160°F, 175°F, 185°F, 190°F, 200°F, Boil
①
②
③
④
⑤
⑥
⑦
⑧
Product Diagram
KEEP
WARM
SET
STAR
T/ST
OP
160
o
F
185
o
F
200
o
F
190
o
F
175
o
F
Delicate
Boil
Green
White
Black
Oolong
French Press
PUSH
①
③
④
⑥
⑦
⑧
⑤
②
0.5L
0.75L
1.0L
1.25L
1.5L
1.7L
MAX
