S
PECIFICATIONS
LCD
Type
17” diagonal viewable screen
TFT (Thin Film Transistor),
Active Matrix Panel, 0.264mm pixel pitch
Color Filter
R, G, B vertical stripe
Colors
up to 16.2 mio. colors
Glass surface
Anti-glare coating
Viewing
Angles
Left / Right
75° / 75°
(CR>10)
Up / Down
60° / 65°
Contrast Ratio
Typ.
450 : 1
Luminance of White
Typ.
250cd/m²
Response Time
Typ
.
25ms
Compatibility
PC
IBM XT, AT, 386, 486, Pentium or PS/2
and compatibles (from VGA up to
1280 x 1024 @ 75 Hz NI.)
Refresh Rate
Max.
1280 x 1024 @ 75Hz NI
(60Hz for optimal display)
Connectors
Input Signal
15-pin D-SUB
Power
Input
AC 90-264V 50-60Hz
Consumption
40 watts (Maximum)
Display Area
Max.
338mm (H) x 270mm (V)
Operating
Temperature
32°F to 104°F (0°C to 40°C)
Humidity
20% RH to 90% RH (no condensation)
Altitude
To 10,000 feet
Storage
Temperature
-14°F to 104°F (-20°C to 40°C)
Conditions
Humidity
5%RH to 90%RH (no condensation)
Dimension
459mm(W) x 467mm(H) x 165mm(D)
Weight
Net
7.5kg
14
15
T
ROUBLESHOOTING
No power.
ü
Flip the power switch ON. The Power LED turns on.
ü
Make sure AC power cord is securely connected to the power jack
and to a power outlet.
Power on but no screent image.
ü
Make sure the video cable attached with this monitor is tightly
secured to the video output port on the back of the computer.
ü
Adjust the brightness and contrast.
Image is unstable, unfocused.
ü
Use “AUTO-TUNE” to adjust automatically.
ü
If the image is still unstable after “AUTO-TUNE” processing,
please adjust “PHASE” manually to get image focused.
ü
Check whether the resolution or refresh rate in windows display
setting is beyond supported range(please refer to the specification
of supported mode).
Flickering.
ü
Not enough power is being supplied to the miro TD271 Monitor.
Connect the miro TD271 Monitor to a different outlet. If a surge
protector is being used, there may be too many devices plugged in.
ü
See Timing Guide in this manual with a list of refresh rates and
frequency settings showing the recommended setting for the
miro TD271 Monitor.
Wrong or abnormal colors.
ü
If any colors (Red, Green, or Blue) are missing, check the video
cable to make sure it is securely connected. Loose pins in the
cable connector could cause a bad connection.
ü
Connect the miro TD271 Monitor to another computer.
ü
Check the graphics card for proper sync scheme (or sync
polarities) to match the miro TD271 Monitor’s specifications.
