MIRKA PROS 580CV, Instructions For Use Manual

Page: 33 / 124

30
Specifications subject to change without prior notice.
*The values stated in the table are from laboratory testing in conformity with stated codes and standards, and are not sufficient for
risk evaluation. Values measured in a particular work place may be higher than the declared values. The actual exposure values
and amount of risk or harm experienced by an individual are unique to each situation and depend upon the surrounding environ -
ment, the way in which the individual works, the particular material being worked, work station design as well as upon the exposure
time and the physical condition of the user. KWH Mirka, Ltd. cannot be held responsible for the consequences of using declared
values instead of actual exposure values for any individual risk assessment.
Further occupational health and safety information can be obtained from the following websites:
https://osha.europa.eu/en
http://www.osha.gov (USA)
Product Configuration/Specifications: 10,000 OPM Orbital Sander
Product Configuration and Specifications: 10,000 OPM 75 mm x 100 mm (3 in. x 4 in.) Orbital Sander – 3 mm (1/8 in.) Orbit.
Note: All self generated vacuum machines use Ø 28 mm (1 in.) vacuum hose fittings as standard. Ø 19 mm (3/4 in.) is available.
All central vacuum machines use Ø 19 mm (3/4 in.) vacuum hose fittings as standard. Ø 28 mm (1 in.) is available.
Orbit Vac Type Pad Size
mm (in.)
Model
Number
Product Net
Weight kg
(Pounds)
Height
mm (in.)
Length
mm (in.)
Power
watts
(HP)
Air Consumption
LPM (scfm)
*Noise
Level dBA
*Vibration
Level m/s
2
*Uncertainty
K m/s
2
3 mm (1/8
in.)
Central
Vacuum
75 x 100
(3 x 4)
OS343CV 0.72 (1.58) 83.5
(3.29)
202.4
(8.0)
179
(0.24)
453 (16) 76 2.6 1.3
DB
75 x 100
(3 x 4 )
OS343DB 0.72 (1.58) 83.5
(3.29)
208.9
(8.2)
179
(0.24)
453 (16) 81 3.5 1.7
Non-vac 75 x 100
(3 x 4 )
OS343NV 0.70 (1.55) 83.5
(3.29)
139.3
(5.5)
179
(0.24)
453 (16) 76 2.6 1.3
The noise test is carried out in accordance with EN ISO 15744:2008 – Hand-held non-electric power tools – Noise measurement code – Engineering method (grade
2).
The vibration test is carried out in accordance with EN 28662-1. Hand-held portable power tools – Measurement of vibration at the handle. Part 1: General and EN
8662-8, 1997. Hand-held portable power tools – Measurement of vibration at the handle. Part 8: Polishers and rotary, orbital and random orbital sanders.