Miris Ultrasonic, User Manual, Page: 6 / 16

6 | Miris Ultrasonic Processor User Manual
SAFETY INFORMATION
When mounting the probe, always clamp the converter housing.
Never clamp the probe.
Make sure the Ultrasonic Processor is properly grounded via a
3-prong outlet.
High voltage is present in the power supply. Do not remove the
cover. Service can only be performed by an authorized service
technician. Ask your local distributor or contact Miris.
Never operate the power supply unless it is connected to the
converter.
Never secure anything to the probe.
Never touch a vibrating probe.
Never allow a probe to vibrate in air for more than 10 seconds.
Always use input voltage 110/240 V , 50/60 Hz.