Introduction
Elevator Restriction System Installation and Operation Manual
13
The Elevator Restriction Unit consists of the Elevator Restriction Controller
Board and the Elevator Restriction Backplane. Up to eight relay boards can be
installed on the backplane, allowing for control of 96 elevator floors (8 boards x
12 relays per board). See Figure 7.
The Elevator Restriction Unit performs the following functions:
•
A maximum of 96 time-dependent relay contacts
•
RS-485and TCP/IP interface to network to other units
Figure 7.
Elevator Restriction Unit
1.8
Warranty and Special Notices
Mircom values your business and always attempts to provide you with the very
best service.
See the Warranty and Warning Information chapter on page 41 and the Special
Notices on page 46 for information about the warranty and special notices about
equipment use.
Each slot
accepts a
relay board
Elevator Restriction
Controller Board
Elevator Restriction
Backplane
