Below is a diagram showing the interconnection required for multiple building and master paging from one building.
Figure 1: QMP-5100AX and QMP-5100MSB Interconnection Drawing
QMP-5100B/5101B
QMP-5100B/5101B
QMP-5100AX
AUDIO 1
AUDIO 1
AUDIO 2
AUDIO 2
PTT 1
PTT 1
PTT 2
PTT 2
MAIN
MAIN
BUP
BUP
LOCATION 1
LOCATION 2
CONTROLS LOCATION 2
QMP-5100MSB MICROPHONE SPLITTER BOARD CONNECTIONS
NOTE: CONNECTS TO QIF-5000B #2, 3 AND 4 AS SHOWN FOR QIF-
5000B #1. ONLY THE CONNECTIONS TO THE MICROPHONE SPLITTER
BOARD SHOWN.
POWER CONNECTIONS TO THE MICROPHONE SPLITTER BOARD
CIRCUIT (V+, 0 V) ARE NEEDED FOR THE QIF-5000 #1 AND #2 ONLY.
IF NO MICROPHONE IS CONNECTED TO THE QMP-5100B/QMP-5101B,
INSTALL END OF LINE RESISTORS (3K9 ohms) ON THE MICROPHONE
TERMINAL BLOCK
QIF-5000B #1
QIF-5000B #2
QMP-5100MSB
MIRCOPHONE MULTIPLEXER
MICROPHONE
MICROPHONE
CONNECTION
CONNECTION
BLK RED SH GRN WHT SH
RED, BLK = PTT SWITCH
WHT, GRN= CARTRIDGE)
