FIGURE 3. VIEWS SHOWING POSITION OF TEST MAGNET.:
3 2
1
3 2
1
3 2
1
(–)
(+)
+
-
ULC LISTED COM
PA
TIBLE
CONTRO
L
PA
NEL
CAUTION: DO NOT LOOP WIRE
UNDER TERMINAL 1 OR 2.
BREAK WIRE RUN TO PROVIDE
SUPERVISION OF CONNECTIONS.
CLASS A OPTIONAL WIRING
REMOTE
ANNUNCIATOR
(–)
(+)
FIGURE 1:
FIGURE 2. ROTARy DECADE ADDRESS SWITCHES:
TENS
ONES
9
8
7
6
5
4
3
2
1 0
9
8
7
6
5
4
3
2
1 0
10
11
12
13
14
15
LED
TEST MAGNET
MARKER
LED
TEST
MAGNET
MARKER
FIGURE 4:
C0129-00
C0146-01
C0152-00
C0151-00
SS-400-002 2 I56-3321-000
©2012 Mircom
Mircom warrants its enclosed heat detector to be free from defects in materials and
workmanship under normal use and service for a period of three years from date of
manufacture. Mircom makes no other express warranty for this heat detector. No agent,
representative, dealer, or employee of the Company has the authority to increase or alter
the obligations or limitations of this Warranty. The Company’s obligation of this Warranty
shall be limited to the repair or replacement of any part of the heat detector which is
found to be defective in materials or workmanship under normal use and service during
the three year period commencing with the date of manufacture. After phoning Mircom’s
number 905-660-4655 for a Return Authorization number, send defective units post-
age prepaid to: Mircom, Returns Department, RA #__________, 25 Interchange Way,
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003
THREE-yEAR LIMITED WARRANTy
Vaughan, Ontario L4K-5W3. Please include a note describing the malfunction and sus-
pected cause of failure. The Company shall not be obligated to repair or replace units
which are found to be defective because of damage, unreasonable use, modifications,
or alterations occurring after the date of manufacture. In no case shall the Company
be liable for any consequential or incidental damages for breach of this or any other
Warranty, expressed or implied whatsoever, even if the loss or damage is caused by the
Company’s negligence or fault. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion may not apply
to you. This Warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Please refer to insert for the Limitations of Fire Alarm Systems
FM CLASSIFICATION
RTI ratings are for installations which must comply with FM 3210.
MIX-5251APA RTI:
FAST
MIX-5251RAPA RTI:
V2-FAST
MIX-5251HAPA RTI:
QUICK
firealarmresources.com
