8
Introducing the MiCare Nurse Call and Emergency System
Figure 1 A two-bed suite with some typical Nurse Call and Emergency System devices
installed
Not shown in Figure 1 is the NC-2100K Coordinator Bundle and the computers running the
Dashboard application at the nurse stations.
NC-220 ZF3
End Device
The ZF3 is a battery powered transmitter with 3 inputs (one
cancel button and two general purpose inputs) that can be
used anywhere inputs (for example, door contacts, motion
sensors, or auxiliary smoke detectors) need to be monitored.
When an input becomes active the ZF3 sends the
information wirelessly to the coordinator and the monitoring
software.
NC-500 Pendant
End Device
The Pendant is a battery powered transmitter with one
button. The Pendant is the only mobile device in the network
and has an ultrasonic receiver for locating purposes, in
addition to ZigBee capabilities.
Table 1 Devices in the Nurse Call and Emergency System
Device
Type
Description
+
NC-2000
Patient Unit
NC-220
ZF3
NC-103
Pull Station
NC-210
Beacon
Dome Lights
Summary of Contents for MiCare NC-103
Page 2: ......