3
Menu-Driven Programming
Menu-driven programming allows you to select the feature(s) that you would like to program via the
programming menu. Follow the instructions below to display and navigate through the
programming menu.
Continue pressing
until you reach the feature you want to program. See
Programming
on
page 5 for detailed instructions on how to program features.
Direct Access Programming Codes
Enter one of the Direct Access Programming Codes (see the table below) to immediately access
the particular feature you would like to change. Please note that not all features have Direct Access
Programming Codes.
Step 1: Enter the programming menu
Press
to enter the programming menu.
Step 2: Scroll to first menu option
Press
to scroll to the first menu option.
• To exit to normal mode press
.
• To exit from the programming menu, press
.
Step 3: Scroll to second menu option
Press
again to scroll to the second menu option.
The display will now show the first programmable
feature.
Code
Function
Factory Default
How to Program
*000
Exit programming mode
*000
N/A
*101
Add a new record
N/A
See page 5.
*202
Delete a record
N/A
See page 8.
*222
Enter a prefix
(0) 0905
See page 6.
*303
Enter keyless entry codes
N/A
See page 9.
*404
Delete keyless entry codes
N/A
See page 9.
*505
Change master code
*999
See page 10.
*606
Select pulse (rotary) or tone (DTMF)
Tone 11
See page 12.
*707
Set door open timer
10 seconds
See page 12.
*808
Set on-line timer
60 Seconds
See page 12.
*909
Select multiple/single entrance
Multi 00
See page 13 .
1=Up 3=Down
#=Execute
8 8 8
To Exit PROGRAM
MODE - Press #
3
Enter Resident
Codes - Press #
3
3
