same time,make sure the throttle can reach max&min position,then
Press button
（
F
），
the software can save the Max&Min data and
adjusting.When LED light keep flashing means exiting adjustment
Mode
Understand the Primary Flight Controls
If you are not familiar with the controls of your quadcopter, take
a few minutes to familiarize yourself with them before attempting
your first flight.
Low Voltage Cutoff (LVC)
Once the battery reaches 3V under load , the plane will
continuously low power supplied to the motor until complete
shutdown occurs. This helps present over-discharge of the Li-Po
battery . Land immediately Once the ESC activates LVC .Continuing
to fly after LVC can damage the battery , cause a crash or both .crash
damage and batteries damaged due to over-discharge are not covered
under warranty
Summary of Contents for GV160
Page 1: ...GV160 ...
