Mirapoint RazorSafe 170, Hardware Manual, Page: 53 / 76

Control Panel Assembly
53
Figure 18 Replacing the System Battery
Installing the System Battery
To install the system battery:
1. To install the new system battery, hold the battery with the "+" facing up, and
aligned to the metal tab on the socket.
2.
Press the battery straight down into the socket until it snaps into place.
c
Avoid damaging to the battery connector by firmly supporting the connector
while installing a battery.
3.
Close the appliance. See Closing the Appliance on page 30.
4.
Reconnect the appliance to the electrical outlet and power the appliance on,
including any attached peripherals.
Control Panel Assembly
Removing the Control Panel Assembly
c
Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product
documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized is not covered by your warranty.
Read and follow the safety instructions that came with the product.
To remove the control panel assembly:
1. If installed, remove the optional front bezel. See Removing the Front Bezel on
page 29.
1 system battery
1