Mirapoint RazorSafe 170, Hardware Manual, Page: 30 / 76

Installing Appliance Components
30
2
Figure 6 Removing and Replacing the Appliance Cover
Opening the Appliance
To open the appliance:
1. Unless you are installing a hot-swappable component such as a cooling fan or
power supply, power off the appliance and attached peripherals, and disconnect
the appliance from the electrical outlet and peripherals.
2.
Rotate the latch release lock counter-clockwise to the unlocked position
(
Figure 6 ).
3. Lift up on the latch on top of the appliance and slide the cover back ( Figure 6 ).
4. Grasp the cover on both sides and lift the cover away from the appliance.
Closing the Appliance
To close the appliance:
1. Lift up the latch on the cover.
2.
Place the cover onto the chassis and offset the cover slightly back so that it
clears the chassis hooks and lays flush on the appliance chassis (
Figure 6 ).
3. Push down the latch to lever the cover into the closed position.
4. Rotate the latch release lock in a clockwise direction to secure the cover.
1 latch release lock 2 indent
2
1