Front-Panel Features and Indicators
13
Front-Panel Features and Indicators
Figure 1
Front-Panel Features and Indicators
Item
Indicator, Button, or
Connector
Icon
Description
1
LED panel
The LED panel has four diagnostic indicator
lights that display error codes during
appliance startup.
2
Power-on indicator/
power button
The power-on indicator lights
when the appliance power is on.
The power button controls the DC power
supply output to the appliance. When the
optional appliance bezel is installed, the
power button is not accessible.
When powering on the appliance, the video
monitor can take from several seconds to
over 2 minutes to display an image,
depending on the amount of memory
installed in the appliance.
CAUTION:
Never use the power button to
power off the appliance
3
NMI button
Used to troubleshoot software and device
driver errors. This button can be pressed
using the end of a paper clip.
CAUTION:
Use this button only if directed
to do so by Mirapoint support
representative.
4
System identification
button
Used to locate a particular appliance within
a rack. When the identification button on
the front or back is pushed, the blue status
lights on both sides blink until one of the
buttons is pushed again.
5
Hard drives
Twelve 3.5-inch, hot-swappable SAS drives.
1
4
5
7
8
3
6
2
Summary of Contents for 7700 Series
Page 6: ...6 ...
Page 10: ...10 Preface ...