GUIDE TO INSTALLATION AND OPERATION
26
| XVP-801i
Level (dB)
: -96 to 0 dB in 0.5 dB steps: sets an attenuation level to the channel source. For non-
PCM audio, the level value is overridden to 0 dB.
Embedding
tab, HD Audio output
Audio Insert:
insertion of audio in the HD output signal may be set to
Auto
or
OFF
. When set to
Auto
, only
the audio groups containing at least one audio channel will be embedded at the output. When set to
OFF
, no
audio is embedded in the HD output.
Embedding
tab, SD Audio output
Audio Insert:
insertion of audio in the SD output signal may be set to
Auto 24 bit, Auto 20 bit
or
OFF
. When
set to
Auto
, only audio groups containing at least one audio channel will be embedded at the output at the bit
depth selected. When mode is set to
OFF
, no audio is embedded in the SD output.
Figure 3.12
HD Audio Output group – Embedding tab
The
ABUS
group
When companion audio cards such as the DAP-781i are used to provide additional audio channels, the
ABUS audio bus links installed audio cards and the XVP-801i. This panel, called ABUS group, is used to
instruct the XVP-801i about the presence of installed audio cards and the system configuration.
Multiple Card Config
sub-section
A1/A2 Presence
: Monitors the presence of DAP-781i companion audio cards installed in the chassis (see
section 2.2 XVP-801i Installation).
E1/E2 Presence:
Monitors the presence of Dolby-E decoding modules installed on DAP-781i cards installed
in the chassis.
