50
Rev 1.0 • 13 Oct 09
5. Operation
Operating Concepts
Destination names are often created as a concatenation a category mnemonic with a device index.
S
An MD destination button is actually a selection button and is not a destination button.
Destination Lock
This button is a toggle that sets or clears a
lock
on the current destination. The lock can be removed
at the panel that originally set the lock, at a panel that has the same user ID, or by a forced release at
any panel.
MD Mode
In MD mode, a locked destination has an “L” next to it when it appears in the display. When you
select a locked MD destination with a button, the ‘Destination Lock’ button goes high-tally.
The ‘Destination Lock’ button text is normally “Dest Lock” and when a selected MD destination is
locked, the button legend becomes “Dest Unlock.”
To lock or unlock MD destinations, select the destinations and press a ‘Destination Lock’ button.
X-Y Mode
In X-Y mode, you may lock or unlock the current destination on each of its levels. Select the
level(s) and press the ‘Destination Lock’ button to perform the lock. Select locked levels and press
the ‘Destination Lock’ button to unlock them. A locked level has an “L” next to it when it appears
in the display.
In MD mode, a locked destination appears bright red and its button legend is ‘LOCKED by ‹user›’
and the ‘X-Y Display’ button turns dark red.
In X-Y mode, the ‘X-Y Display’ button turns dark red for a locked destination.
Destination Protect
This button is a toggle that sets or clears a
protect
on the current destination device. The protect can
be removed at the panel that originally set the protect, at any panel that has the same user ID, or by
a forced release at any panel.
S
Note:
a protect prevents
others
from routing to a destination; a lock prevents
anyone
—
even the
user who issued the lock
—
from routing to the destination.
S
You may lock a protected destination, but you cannot change a locked destination to a protected
destination directly. You must first unlock it.
The ‘Destination Protect’ button text is normally “Dest Protect” and when a selected MD destina-
tion is protected, the button legend becomes “Dest Unprotect.”
MD Mode
In MD mode, a protected destination has a “P” next to it when it appears in the display. When you
select a protected MD destination with a button, the ‘Destination Protect’ button goes high-tally.
To protect or unprotect MD destinations, select the destinations and press a ‘Destination Protect’
button.
X-Y Mode
In X-Y mode, you may protect or unprotect the current destination on each of its levels. Select the
level(s) and press the ‘Destination Protect’ button to perform the protect. Select protected levels
Summary of Contents for NV9642
