manualshive.com logo in svg

Miranda NV8144, User Manual

Share
Download
Miranda NV8144 User Manual Download Page 4

iv

Rev 2.2 • 27 Mar 10

Change History

The table below lists the changes to the Digital Router User’s Guide.

• User’s Guide Part # UG0034-03

• Software version: -none- 

Restriction on Hazardous Substances (RoHS)

Miranda is in compliance with EU Directive RoHS 2002/95/EC governing the restricted use of cer-
tain hazardous substances and materials in products and in our manufacturing processes.

Miranda has a substantial program in place for RoHS compliance that includes significant invest-
ment in our manufacturing process, and a migration of Miranda product electronic components and 
structural materials to RoHS compliance.

It is our objective at Miranda GVD to maintain compliance with all relevant environmental and 
product regulatory requirements. Detailed information on specific products or on the RoHS pro-
gram at Miranda is available from Miranda Customer Support at 

1-800-719-1900 (toll-free) or
1-530-265-1000 (outside the U.S.).

Rev

Date

ECO

Description

Approved By

1.0

21 Apr 09

15703

Initial release.

DM, DC

2.0

10 Oct 09

16114

Incorporates material for the NV8576, NV8280, and 
NV8144 with corrections and new information.

DM, DC

2.1

12 Jan 10

16272

Minor corrections, page 74, 76.

DM, DC

2.2

27 Mar 10

16912

Changes to SFP modules; UniConfig connections; 
Added signal numbering for backplanes. Changed 
WECO to terminal block. Added monitoring functions 

for NV8144.

DEM, RH, BH

Summary of Contents for NV8144













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands