Miranda iMC-Panel-300, Operator'S Manual

Page: 146 / 176

134
Operation
Shuffling Audio Channels
Audio Channel Shuffle
This is the ‘Audio Channel Shuffle’ sub-menu:
See Shuffling Audio Channels , next, for information.
Press the ‘Back’ button to return to the audio menu.
Touch the ‘Main Menu’ button to return to the main menu.
Shuffling Audio Channels
There is an ‘Audio Channel Shuffle’ sub-menu under the following menus:
• PGM In Audio
• PST In Audio
• Voice-Over 1
• Voice-Over 2
Pressing the ‘Shuffles’ button takes you to an ‘Audio Channel Shuffle’ menu. The 4 shuffle menus
are functionally identical.
The shuffle menu presents a 16×16 crosspoint matrix. Inputs (rows) are mapped to outputs
(columns) with a green circle.
Performing a Shuffle
Although it is not immediately evident how to perform a channel shuffle, it is not difficult. You
can use either the joystick or the arrow buttons in the lower left part of the menu.
To initiate a shuffle (when the shuffle menu is displayed), either move the joystick or press one of
the arrows. A red reticle (or crosshair or cursor) appears that you can either drag with the joystick
or position with the arrow buttons.