HDA-1811 Reclocked High Definition Digital Video DA
Guide to Installation and Operation
HDA-1811
Page
3
of
4
reporting for this card on the DENSITÉ frame’s serial
and GPI interfaces.
Status Indicator
REPORT
COLOR (F=flashing)
SERIAL
GPI
G
Y
R
FR
No errors
No Input
Signal
No rear
panel
No lock
on input
: Factory default.
NOTE: A “Flashing Yellow” Status LED indicates that
the SELECT button on the front panel has been
pushed, and the card is being accessed by the
controller. The LED color assignments for the various
error conditions can be reconfigured by the user.
User Interface
Push the SELECT button on the front edge of the
HDA-1811 to see a report of the current error status
on the DENSITÉ frame’s controller card display. The
HDA-1811 has four possible status messages:
S T A T U S
E R R O R N O R E A R
O K
E R R O R N O S I G N A L
E R R O R N O L O C K
The STATUS LED will revert to it’s normal state upon
a second push of the button, or after a short delay
otherwise.
Example :
SELECT button pushed when the status LED is
green:
SELECT button pushed when there is no input
signal connected to the rear panel and the LED
is steady red:
H D A - 1 8 1 1
O K
S T A T U S
H D A - 1 8 1 1
A L
N O
S I G N
