Guide to Installation and Operation
DAC-191p |
5
4.0 Operation
4.1 Switch Settings
Figure 4 shows the slide switch locations and functions.
Output CAV standard (SW1)
Normal and Test (SW2)
picoLink
CAV
OUT
SDI IN
Status LED
BE
T
A
GBR 7.5
GBR
No
rm
al
No
rm
al
Te
s
t
DAC-191p
Miranda Technologies inc.
Made in Canada
Figure 4
: DAC-191p switch settings
Output CAV standard switch (SW1)
BETA:
For BETA/EBU CAV outputs, set SW1 to
this position. The Y/B-Y/R-Y outputs are
provided by the green, blue, and red
connectors respectively.
GBR 7.5:
With 525-line inputs, set SW1 to this
position for GBR outputs with 7.5 IRE setup.
There is no setup for 625-line GBR outputs.
GBR:
For GBR outputs with 0 IRE setup, set SW1
to this position.
Normal and test pattern switch (SW2)
Normal:
For normal operation, set SW2 to this
position.
Test:
Set SW2 to Test in order to enable the test
pattern generator. Make sure a valid 4:2:2
