![Miranda ASD-111i Manual To Installation And Operation Download Page 10](http://html.mh-extra.com/html/miranda/asd-111i/asd-111i_manual-to-installation-and-operation_1805590010.webp)
4
2.
Carefully place the ASD-111i between the card guides and gently push the
card towards the rear of the housing frame until the card's edge connector is
secured to the backplane. Pull lightly on the card verifying that it does not
move.
3.
Replace the housing frame's front panel.
2.2 Rear Panel Label
2.2.1
imaging
Quartet/Quartet-C/Quartet-M/Solo Connector Label
A connector label has been shipped with your ASD-111i. This label is to be
installed on the housing frame's rear panel in order to identify the ASD-111i external
connectors. To install the label, follow these steps.
1.
Remove the screws associated with the ASD-111i connectors.
2.
Carefully apply the label to the connectors as shown in Figure 2.1.
3.
Replace the screws making sure not to damage the label.
Figure 2.1
ASD-111i rear panel label installation
2.2.2
imaging
Symphonie Connector Label
To install the Symphonie label, follow these steps while referring to Figure 2.2.
1.
On Symphonie’s rear panel, locate the appropriate connectors.
2.
Remove the rear label mounting screws from the rear module.
3.
Carefully apply the label to the connectors making sure the label’s text is read
from top to bottom.
imaging
Quartet
or
imaging
Solo
(top view)
ASD-111i label