background image

MIRAGE KP-1 Pre-Amplifier

 

 
 

 

MIRAGE 

COMMUNICATIONS EQUIPMENT 

 

ONE YEAR LIMITED WARRANTY 

 
Any Mirage Communications product found to be defective in materials 
or workmanship will be repaired or replaced (at Mirage's option) for a 
period of one year from the date of original purchase. 

During the warranty period Mirage Communications will provide, free of 
charge, both parts and labor necessary to correct defects in material or 
workmanship. 
To obtain such warranty service, the original purchaser must: 

(1) 

Provide "proof of purchase". 

(2)

  Ship the product in its original container or equivalent, fully 

insured and shipping charges prepaid, to Mirage, as addressed 
below. 

All internal adjustments are factory set for best performance consistent with 
reliable operation.  Changing internal adjustments may void this warranty. 
Improper maintenance or repair may also void this one year warranty.  We 
recommend that units requiring repair during the warranty period be returned to 
the factory. 
This unit was not designed for repeater operation, and its use in such service is 
at your own risk. 
Mirage assumes no responsibility for any item connected to or used in 
conjunction with this product. 
The foregoing constitutes Mirage's entire obligation with respect to this product 
and the original purchaser and any user or owner shall have no remedy and no 
claim for incidental or consequential damages. 
All Mirage products to be serviced, in-warranty or out-of-warranty, should be 
shipped, freight paid, to: 

Mirage, 116 Willow Road, Starkville, MS 39759, 

USA.  

Product must be accompanied by a letter describing the problem in detail. 

Be sure to include YOUR NAME, ADDRESS, AND TELEPHONE 
NUMBER!

 

Summary of Contents for KP-1 series






Reviews: