Mirage IVEH121A, Owner'S Manual

Page: 50 / 62

50
Step 3: Anchor outdoor unit
The outdoor unit can be anchored to the ground
or to a wall-mounted bracket.
UNIT MOUNTING DIMENSIONS
The following is a list of different outdoor unit
sizes and the distance between their mounting
feet. Prepare the installation base of the unit
according to the dimensions below.
If you will install the unit on the ground or
on a concrete mounting platform, do the
following:
1. Mark the positions for four expansion
bolts based on dimensions in the Unit
Mounting Dimensions chart.
2.
Pre-drill holes for expansion bolts.
3. Clean concrete dust away from holes.
4. Place a nut on the end of each expan-
sion bolt.
5. Hammer expansion bolts into the pre-
drilled holes.
6. Remove the nuts from expansion bolts,
and place outdoor unit on bolts.
7. Put washer on each expansion bolt,
then replace the nuts.
8. Using a wrench, tighten each nut until
snug.
A
Air inle t
Air outlet
Air inle t
W ARNING
WHEN DRILLING INTO CONCRETE,
EYEPROTECTION IS RECOM-
MENDED AT ALL TIMES.