Screw the valve into the “T” fitting so the valve is tight. In
most cases, hand tight is sufficient. If wrenches are
required, be careful not to over tighten. Valve should be
straight up and down when tightened. Valve should be
back tight against the 4"1185 riser pipe.
523548_Miraco_3465:Layout 1 3/19/14 5:31 PM Page 6
Summary of Contents for MiraFount 3465-E
