47
3.2
Positioner Setting
Satellite : Select the satellite which you want to search for the
Service.
-
Press the LEFT/RIGHT ARROW button to select the satellite.
-
If you press the OK button, a complete satellite list will be
displayed.
-
Select the wanted satellite name.
-
If the desired satellite name is not listed then select User
Defined.
Tuner : Select tuner that you want to set
(Tuner 1/ Tuner 2).
If
you have set
‘Loop-Through’
in the menu
(Installation-Dish
Setting-Tuner Connection),
this menu(Tuner) will be automatically disabled.
Frequency : Select the satellite frequency you want to use to check for a signal.
Positioner : Select the positioner.
-
None :
(No Positioner)
-
Using DiSEqC 1.2 :
Move :
To move the dish, press LEFT/RIGHT button.
Fine Move :
To move the dish in smaller steps, press the
LEFT/RIGHT ARROW button.
Step :
Set to positioner moving steps as 1, 2, 3, 4
Positioner Command :
To use various positioner commands,
press the OK button. Then, available positioner commands
will appear.
-
Using USALS :
Move :
To move the dish, press the LEFT/RIGHT button.
Fine Move :
To move the dish in smaller steps,, press the
LEFT/RIGHT ARROW button.
Step :
Set to positioner moving steps as 1, 2, 3, 4
Dish Longitude :
Enter the longitude position of the
antenna using the NUMERIC buttons.
Dish Latitude :
Enter the latitude using the NUMERIC
buttons.
Go To :
Press the OK button to rotate the dish to the
selected antenna position.
Dish Setting : Press the OK button to move to
Dish Setting
menu directly.
Service Search : Press the OK button to move to
Service Search
menu directly.