Follow these safety precautions when operating the Miracle Paint Rejuvenators Blue Boy Mixer.
Installation
1. Before operating the machine, read this Owner’s manual carefully.
2. Ground the machine properly. Be sure to follow proper grounding and electrical procedures.
3. Avoid dangerous environments. Do not use the machine in a damp or wet environment.
4. Use the proper power source
Dial timer model: Plug cord into 110V outlet.
Explosion proof model: Must be installed by qualified electrician in compliance with the hazardous
environment the mixing is taking place in (see page 5).
5 Avoid extension cords. To minimize the risk of circuit overload, or improper electrical grounding do not
use extension cords.
Operation
6. Ensure the can being mixed is securely clamped.
7. Keep customers away from mixing area. Only trained personnel should operate the mixer.
Maintenance
8. Do not get the timer or wiring wet. Failure to do so could result in electric shock.
9. Clean all surfaces of the machine with soap and water. Do not use any solvent-based cleaners or thinners.
10. Disconnect machine from power source before cleaning or servicing mixer.
11. Be sure to maintain the mixer on a regular basis. Follow the maintenance procedures on page 6.
4
Installation Instructions
Machine must be anchored to floor. Use appropriate hardware.
When anchoring the mixer ordinary precaution should be taken to level the machine. Corner shims may
be necessary before securing the mixer to floor.
For X-proof models run conduit through hole in side of base to motor (see page 5). No wire harness pro-
vided.
