Safety Information
23
Troubleshooting
22
SYMPTOM
POSSIBLE CAUSES
SOLUTIONS
LED is slowly
pulsing green
or blue, but no
streamed sounds
are heard in the
hearing aids.
Hearing aids are not
paired with
Miracle-EarLINK
™
Mic+.
Follow steps in Pairing with
Hearing Aids section.
No incoming audio
signal is available.
• Turn on the electronic
audio source.
• Unmute or increase
volume on electronic
audio source.
• Ensure loop or FM system
is present.
LED is solid red.
Possible error
condition.
Turn off Miracle-EarLINK
™
Mic+, wait 30 seconds, and
then turn it on.
Input Mode
LED is rapidly
blinking.
Something is absent
from current audio
source.
Attach line-in cable, attach
FM receiver, or reestablish
your Bluetooth connection.
Input Mode LED
is not illuminated.
Input Mode LED
is turned off to
conserve battery
power.
Press Input Mode button to
illuminate the Input Mode
LED.
Desired Input
Mode not
available.
Something is
missing from
desired input.
Attach line-in cable, attach
FM receiver, or reestablish
your Bluetooth connection.
Unable to pair
with more than
one Bluetooth
device.
Miracle-EarLINK
™
Mic+ is already in
an active Bluetooth
connection.
Follow steps in Pairing with
Bluetooth Devices section.
Unexpectedly
lose TV (optional
product) audio
while LED is slowly
pulsing blue on
Miracle-EarLINK
™
Mic+
Some Bluetooth
device sounds are
higher priority than
TV Streamer audio.
Move out of Bluetooth
input mode on
Miracle-EarLINK
™
Mic+.
Safety Information
Required Information
Waste from electronic equipment must be handled according
to local regulations.
Instructions for Disposal of Old Electronics
Miracle-Ear
®
encourages, and your local community laws may require,
that your Miracle-EarLINK
™
Mic+ be disposed of via your local electronics
recycling/disposal process.
The below instructions are provided for the benefit of disposal/recycling
personnel. Please include this manual when disposing of your
Miracle-EarLINK
™
Mic+.
For Disposal/Recycling Personnel Only
This product contains a Lithium-ion Polymer battery. To remove this
battery:
• Power off the Miracle-EarLINK
™
Mic+.
• Pry apart the housing halves with a small screwdriver.
• Cut the battery wires from the circuit board to prevent accidental
shorting.
• Pry the battery away from the housing using a wide flat blade.
Intended Use
The Miracle-EarLINK
™
Mic+ is an accessory to a 2.4 GHz wireless air
conduction hearing aid. It is intended as a wireless transmitter of sound
from a variety of audio sources to air conduction hearing aids. When worn
by a distant speaker in noisy environments, it functions as an assistive
listening device. It also connects to loop signals, FM signals when an
Europin FM receiver is attached, analog line-in audio, and standard
Bluetooth audio.
The Miracle-EarLINK
™
Mic+ is classified as a Type B applied part under the
IEC 60601-1 medical instrument standard.
The Miracle-EarLINK
™
Mic+ is designed to operate in public and
residential environments and are designed to comply with international
Electromagnetic Compatibility emissions and immunity standards for
medical devices. However, it is still possible that you may experience
interference caused by power line disturbances, airport metal detectors,
electromagnetic fields from other medical devices, radio signals and
electrostatic discharges.
The Miracle-EarLINK
™
Mic+ is designed to be cleaned with a damp cloth
moistened with soapy water.
