6
1.2 Down mode
In this mode, one effective single click is recognized when finger touches touch
screen surface. This mode has single and double click function, but no dragging
function.
1.3 Drag mode
In this mode, one effective touch is recognized when finger touches touch screen,
and when finger left touch screen, a release is recognized, in this mode, touch
screen has single click, double click and dragging function, this function is not
recommended in general cases.
2.0 Touch control Stability
Higher stability provides more stable performance, but when the movement lag is
noticeable, stability can be adjusted lower, to get quicker response.
6. Calibration
For first time operation after installation or after adjusting screen resolution, it’s necessary
to calibrating touch screen. Please follow below instruction:
Click on “calibration” button, when the calibration interface shows up, pleases click on the
marks appearing on screen in turn, the surface will be closed and calibration will be
effective automatically when completion. Calibration can be done repeatedly to get the best
performance in case the result of first calibration is not good enough. Click “confirm” to
complete calibration.
7. Trouble shooting
If the touch screen does not respond to touch, please follow the following steps to try
resolving the problem:
1
．
Check the connectors to ensure they are connected correctly and firmly.
2
．
Reinstall driver.
If you need further help, please contact us.
8. Working environment
Working temperature
：
-41
℃
－
60
℃
Working humidity
：
0
－
85%
Certificates
：
CE and FCC
Maximum allowable pressure on surface of glass
：
30KGF/Square meter
Impact resistance
：
Touch screens have past drop testing of 1040g steel ball falling from
1m height.
