Spirodoc
cod. 980156
Rev 1.3
EN 53/67
E
N
GLI
S
H
control panel
click on “System”, where the type of operating system installed
on the PC can be checked).
If winspiroPRO is already installed on the PC then a new installation is not
required.
Before connecting the SPIRODOC via USB to the PC, the WinspiroPRO software
must be installed on the PC first to enable the software to interface with the
device.
Before initiating the following procedure it is important to know the operating
system version installed on the PC used for the connection (from control panel
click on “System”, where the type of operating system installed on the PC can
be checked).
If winspiroPRO is already installed on the PC then a new installation is not
required.
To make the connection, insert the mini USB connector
supplied with
SPIRODOC
as shown in the picture and
attach the other connector to the USB port of the PC.
When initially making a connection, depending on the
version of the operating system, the PC will either
make an automatic driver installation (for Windows 98,
2000, ME) or request some information (for Windows
XP, Vista and Seven). To avoid making any errors at
this stage please read the Advanced section of the
winspiroPRO User Manual carefully.
4.4
PC connection via Bluetooth
The bluetooth connection to the PC allows for the USB ports to remain unused while
still having a connection whereby the
SPIRODOC
is directly managed by the
winspiroPRO software (as with a USB connection)
SPIRODOC
is capable of performing on-line real time spirometry tests via Bluetooth
connection.
WARNING
To function properly the PC must have Bluetooth connectivity embedded or
must be equipped with an external Bluetooth USB dongle. Before starting the
Bluetooth connection procedure it is necessary to have previously performed
the procedure described in paragraph 3.6 (BLUETOOTH setup).
For proper peripheral management please refer to the software user manual on line.
4.5
Internal software upgrade
SPIRODOC
internal software can be upgraded from a PC via USB connection.
Upgrades can be downloaded by registering on www.spirometry.com. For further
information on software upgrading please read
the “winspiroPro” software manual.
5. MAINTENANCE
