Spirobank Oxi
ENGLISH
Ver. 1.5
User Manual
Page 20 di 33
The hand dishwashing detergent that was tested includes the following ingredients:
Aqua, coco glucoside, myristyl glucoside, lauryl glucoside, sodium chloride, sodium
gluconate, sodium citrate, allyl caproate, ethylene brassylate, methyldihydrojas-
monate).
Rinse in clean water and shake gently to remove any excess water. Allow to air dry on a
towel. Store in a clean, dry place in your home.
After cleaning, insert the turbine into the socket in the direction indicated by the screen-
printed closed padlock symbol on the
Spirobank Oxi
. To insert the turbine correctly, push
it down and turn clockwise until it stops, to make sure it is fully inserted into the plastic
container.
3.2
Cleaning of the mouthpiece
Make sure to clean the mouthpiece after each use. To clean the mouthpiece, simply pull
it apart from the turbine. Using the same method as for the turbine, immerse the
mouthpiece in warm soapy water and shake the mouthpiece for 2-3 minutes. Rinse in
clean water and shake gently to remove any excess water. Allow to air dry on a towel.
Store in a clean, dry place in your home.
After cleaning, insert the mouthpiece in the turbine, by pressing lightly.
3.3
Replacing the FlowMir® turbine
After each session, then every time you change patients, replace the FlowMir® turbine with a
new one. Then detach the one applied to
Spirobank Oxi
, operating in reverse order to the one
described in point 2.4; then apply a new FlowMir® before performing a new test session. The
FLowMir® used must be disposed of in accordance with the local laws in force.
3.4
Cleaning of the device
Clean the device
every time you change patients
.
Use only the substances and methods listed in this chapter to clean the device.
Recommended cleaning agents are:
•
Mild soap (diluted)
