mIoT Captis Installation Guide
September 2020
9
Rev 5
CAPTIS PULSE
The Captis Pulse is provided with a 4-core cable that can be connected either one or two sensors and
measurement devices. Use the table below to determine how to wire the connections between the Captis
Pulse and the sensor.
CAPTIS PULSE - TERMINATION FOR TYPICAL APPLICATIONS
The following tables are provided for typical applications of the Captis Pulse
PULSE T PROBE FOR WATER METER
with optional Cable Cut Detection Loopback
FLOAT SWITCH
If you require guidance connecting your specific sensors, please contact mIoT at
