Miomare JM200CG-LIDL, Assembly Instructions Manual

Page: 9 / 46

9 GB
First use
■
CAUTION! Turn off the hot and cold water supply before
starting the installation.
Note: To reduce water consumption, you can, in place of one
of the sealing rings, fit the water-saving gasket in the threaded
connector for the shower handset.
Follow these steps:
□
Place a sealing ring
1
or the water-saving gasket
5
in the
threaded connector
2
for the shower handset.
□
Screw your shower handset to this connector until finger-tight.
□
Place a sealing ring in the threaded connector
4
for the
thermostat.
□
Screw this connector to the shower hose connector on your
thermostat.
•
First use
□
Once successfully installed, turn on the hot and cold water
supply.
□
Make sure to carefully check that all connections are leak-tight
after the first use.