14 GB
Using the product
Turn on the product by sliding the ON / OFF switch
5
to “
I
”
(ON) position.
Place the product on a solid level and non slip surface.
Hold your hand between the two sensors
3
and the soap
outlet
4
and catch the soap on your hand.
During the soap dispensing process, a white status indicator light
will light up in the soap container
2
. As soon as you move your
hand away, the status indicator light will goes off automatically. If
the product has just been filled, repeat the process until soap is-
sues from the soap outlet
4
.
Cleaning and care
DANGER OF EXPLOSION!
Do not immerse the
product in water.
Note:
If no longer use, clean the empty soap container
2
by
rinsing it with clean water. Fill the soap container
2
with clean
water and repeat this step several times to remove the soap com-
pletely. The product may get damaged if the soap is not removed
completely.
Use a dry, fluff-free cloth when you are cleaning or polishing the
outside of the product.
Use a slightly moist, fluff-free cloth and a mild detergent to remove
stubborn dirt.
Do not use corrosive cleaning agents. These substances may
damage the basic material of the product.