7
en
Operating basics
Turning the recorder ON
Complete the installation according to the instructions in the “Using your recorder in a
vehicle” section. Once the vehicle engine is started the recorder automatically turns on.
When the vehicle engine is turned off or the recorder's power is disconnected, the
recorder automatically saves the recording and turns off.
When a GPS fix is established, the GPS signal icon (
) will show on the top-right
corner of the screen*.
Occasionally you may need to perform a hardware reset when the recorder stops
responding or if it appears to be “frozen” or unresponsive. To restart the recorder press
RESET
.
* For selected models only.
Continuous recording
By default the system will automatically begin with continuous recording in a few seconds
after start up. The recording may be divided into several video clips; recording will not stop
between video clips.
When continuous recording is in progress, you can stop recording by pressing
REC/OK
.
When the recording stops, press
REC/OK
again to start recording manually.
CAUTION:
DO NOT remove the memory card while recording.
If continuous recording is ongoing but there is not enough space on your memory
card, new video clips will replace the old ones.
Summary of Contents for MiVue R Series
Page 1: ...User Manual R Series...
